Latest news

MXKEY v3.5 revision 1.7, Public-Release

Published: Sun, 08 Jan 2012 00:55:21 GMT

     
v3.5 revision 1.7, Public-Release
changes:

- Nokia Tool
added:
SL3 RSA Signature verify on "Read Hash", sha readed by MX now is 100% valid
Disk usage info on fire.exe
improvements:
file version indentification for installed data package
phone images definitions in now synched with fire tool
pinout images updated
bugfix:
rapido usb bootstrap causing BSOD
xgold not booting
[sl3bf], oclHashcat 00.08 speed not shown
hti drivers updated
updated sl3u to version 1.7
added: Master sp code verification on calculate cod
improved: online logger function
updated sl3bf to version 3.6
added: Master sp code verification after bf task finished
bugfix: oclHashcat-lite-0.08 with "--outfile-format=1" problem
and minor bugs fixed
Public discussions thread

MXKEY v3.5 revision 1.6, Public-Release

Published: Tue, 13 Dec 2011 09:36:43 GMT

v3.5 revision 1.6, Public-Release
changes:
- MAIN
introduced HTI Firmware version 00.49
new in firmware:
added: boot mode switch function
improved: serial and flash bus communication routine
added: dct4 product data calc algorithm
added: broadcom sec.repair algorithm
please Update HTI by using "Update HTI" button !
uistyle updated
HTI identity now displayed on Dongle Maintenance
HTI serial displayed on connection tab
added: support for HTI PLUS interface
- Nokia Tool
bugfixed: NCK send for PA_SIMLOC30 (error 0x1)
added: HTI Standalone function for DCT4 PRODUCT/BT/WLAN DATA fix.
required HTI FW version 00.49 or later
added: BB5 security repair function by USB for RAP3Gv4, RAPUv2, BROADCOM(BCM21351)
added: BB5 security repair function by HTI for RAPUv2
improved: BB5 security repair function on all supported ASIC
Note for BB5 security repair function:
Works standalone with HTI connected
Required HTI FW version 00.49 or later
This function includes:
FULL RPL BACKUP
SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SIMLOCK REPAIR (PA_SL/PA_SL2)
NCK CALC (PA_SL/PA_SL2)
SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
SL3 NCK CALC (PA_SL3/PA_SIMLOC30, 15 digit NCK)
Phones supported by HTI:
Any RAPUv1, RAPUv2, RAP3Gv3, RAP3Gv4 and RAPIDO phones.
Phones supported by USB:
Any RAPUv1, RAPUv2, RAP3Gv4, RAPIDO and BROADCOM(BCM21351) phones.
Supported ROOT KEY HASH: ALL HASH supported !
sl3bf(Local SL3 Bruteforce) module changes
added: support for oclHashcat-lite-0.08
sl3u(SL3 Logger) module changes
added: Online Logger page
and more minor bug fixed
...............
- SL3 Logger/Unlocker (sl3u.exe)
added: support for RAP3Gv4, RAPUv2, BROADCOM(BCM21351) by USB
added: Online Logger tab
used to request unlock codes by imei+hash (.sha files)
How to:
1. Register HTI to use this service (choose your password here !)
2. Top up HTI credit to be able to use this service
3. Login using password choosen when registration
4. Upload Hash, select sha or log files
5. Wait for few minutes (As displayed on waiting time)
6. Job Status are displayed once you "Upload Hash" and everytime you "Login"
use "Login" button, to check or request codes for uploaded hash(if any)
7. When status is "finished", right click on individual hash and select one of menues
Abort/Cancel Job: will cancel job and refund credit (only available when job is "pending")
Send Codes to the phone: Send codes directly to the phone
Save Codes to text: Save codes to text file
Copy Codes to clipboard: Copy codes to clipboard

MXKEY v3.5 revision 1.5, Public-Release

Published: Sun, 10 Nov 2011 13:31:43 GMT

v3.5 revision 1.5, Public-Release
changes:
- MAIN
minor bug fixed
added: 2 more uistyle (Style4, Style5)

- Nokia Tool
added: "Extended Scan" option in config
if ticked, will display nck length, dcc (if any), MMC pass (if any), Master code(DCT4) and user code on scan
added: "Clear cached product data" in config
used to clear previous BB5 secure data cache used for BB5 security repair
added: marque progressbar on usb pooling
added: flash loader version 11.34.000.2 to setup
added: 'HTI Auto BSI(SoftTMA)'selection saved as individual config based on selected type.
bugfixed: Verify Secure Data at 'Read SL3 Hash'/'Read Phone IDs'

improved: FBUS communication routine for HTI
improved: XGOLD/MAEMO identification
and more minor bug fixed
- Blackberry Tool
added: "Read MSL" for Blackberry CDMA (Factory OS required)
please select "(COM)Blackberry Serial Port" instead of "(USB)Blackberry Smartphone" in connection list
bugfixed: random AccessViolation on calculation code in standalone mode

MXKEY v3.5 revision 1.4, Public-Release

Published: Sun, 08 Oct 2011 21:31:43 GMT

v3.5 revision 1.4, Public-Release
changes:
- MAIN
introduced HTI Firmware version 00.24
new in firmware:
firmware accept SL3instant unlock activations
bugfixed: BB5 security repair algorithm for RAPIDO new ASIC
implemented WD2 and BTMCM flashing protocol
implemented TIKU and MM(NAND) flashing protocol
please Update HTI by using "Update HTI" button or "HTIUpdate.exe"
improved: antivirus compatibility.
improved: daily update check routine.
improved: built-in downloader routine
added: resume support
bugfixed: handing big file size(more than 1G)
added: support for upcomming windows 8(windows developer preview) support.
added: Detailed 'LastError' message window when No Security Dongle Detected
added: Detailed HTI identity(boot & fw version, serial) on connect.
New Application released:
MXKEY - Fire Agent(fire.exe), it brand new support tool and firmwares download support client
Using shared configuration with corresponding module, simplify the needs to download/update firmware file.
Working in sync mode with modules for better usage.
using built-in downloader with resume support.
Supported services:
Nokia firmware, along with latest firmware notification info
CDMA firmware, various vendor(Alcatel, Haier, Huawei, LG, Nokia, ZTE)
more services tobe added at the future
- Nokia Tool
important informations(Asic ID, ROOT KEY HASH, UEM Imei) now highlited (beginner friendly).
added: BB5 security repair function for RAPUv2 phones (beta testing)
added: Verify Secure Data at 'Read SL3 Hash'/'Read Phone IDs',
used to verify if secure data readed from the phone is valid to make sure the hash readed by software(both USB/FBUS) is 100% correct
added: "Fire Support" menu in module`s options.
added: support to load variant definitions created by fire.exe
added: Spesified window dialog when card is busy/used by other module to fire.exe, sl3u.exe.
added: support to convert log to other thirparty format to SL3BF module (sl3u.exe)
added: new definition to 'phoneIdentity.ini.default'
added: flash loader version 11.24.000.3 to setup
added: RPL backup list load at scan (used for "Write Rpl' with 'Use RPL file' ticked)
added: PM backup list load at scan
improved: module initialization.
improved: 'phone definitions loading' at first load.
improved: 'HTI Auto BSI(SoftTMA)' set.
improved: file/image version check routine.
improved: Reboot after flash mode
improved: WD2 flashing with HTI
bugfixed: BTMCM flashing bug with HTI
bugfixed: No Security Dongle Detected when HTI connected with phone(HTI power switched off on load)
bugfixed: RAPIDO New Asic security repair function
- CDMA Tool
added: "Fire Support" menu in module`s options.

MXKEY v3.5 revision 1.3, Public-Release

Published: Sun, 07 Aug 2011 10:22:31 GMT

v3.5 revision 1.3, Public-Release
What is new added, changes and improvements:
- added USB STANDALONE security repair function *** for ALL HASH for RAPUYAMA phones.
( required HTI with firmware 00.17 )
- added USB STANDALONE security repair function *** for ALL HASH for RAPIDO phones.
( required HTI with firmware 00.17 )
***
SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
SIMLOCK REPAIR (PA_SL/PA_SL2)
NCK CALC (PA_SL/PA_SL2)
SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
SL3 NCK CALC (PA_SL3/PA_SIMLOC30)
- added: SL3 Logger (sl3u.exe - Standalone SL3 Logger/Unlocker/LOG Converter)
Optimized for SL3 unlock task using HTI or USB cable.
- added: SL3 Bruteforce (sl3bf.exe) 'load at windows startup' option.
- added, notification messages for important function
- added, optional screen recorder
using separated application "camcl.exe", use "Record Session" on system menu
(right click window titlebar)
captured videos will be saved as "capture.avi" in the windows temp folder
will be usefull for reporting bug or something else
- added: connection status/speed information on connect
- moved "[BB5,USB]Use New Protocol for RAPIDO" option to config->Directory
If enabled, will use new loader else will use old loader(embedded to MCU file)
RAPIDO phones with New Protocol connected to HS(High-speed) USB allows to use CERT backup/restore.
Old RAPIDO and RAPIDO connected to non HS USB will not backup CERT due to USB limitation.
NEW ADDED
- added: model selection by type designator or phone description
- added: fw version check between connected phone, mcu image, server during 'Scan Phone'
- added: fw version check between selected mcu image and server during 'market select'
- added: "Copy All Links" on Nokia Download Window
- added: auto complete on Model selection
- added: more detailed description of errors if an error occurs
- added: "[BB5]Use New Protocol for RAP3Gv3" option to config->Directory
- added: phone`s image load from server(if any).
- added: latest firmware version check(if any) for BB5 phone on market select.
- added update dialog window when HTI firmware outdated.
BUG FIXED:
- bugfixed: Nomadik dead usb flashing (Bootstrap failed)
- bugfixed: RAP3Gv3 dead usb flashing (stop at sending bootloader)
- bugfixed: usb3 connection status query
- bugfixed: XGOLD 213 "Use Embedded SBL from MCU" does not work if BB5 selected in generation dropdown.
- bugfixed: access violation on synchronize files when Download window opened.
- bugfixed: application crash on load in some os(win7 x86 no sp).
- bugfixed: XGOLD213 usb flashing error when no mcu spesified
- bugfixed: SL3 read PhoneIDs shows 'Operations not supported'
- bugfixed: X1-01 XGOLD flashing bug.
- bugfixed: No progressbar on flashing.
- bugfixed: New RAPIDO SL3 read PhoneIDs shows 'Operations not supported'
- bugfixed: processing file with size more than 900MB.
- bugfixed: emulate phone on New Protocol causing application to be hang.
- bugfixed: random crash on buscheck with usb connection
- bugfixed: dead after flashing in NOR flash devices (affected on x64 pc with memory more than 4GB)
OTHER CHANGES IN IMPROVEMENTS
- Renamed 'Image DL' caption to 'Download' as this will be easier to understand
- 'Download' will show input dialog if no product code spesified
- local rfbb will also handle rfbb file format
- local dcc will also handle pm file format
- changed FlashLoader selection from dropdown to checklist as this will be more user friendly.
- changed SoftTMA to slider as this will be more user friendly.
- Some UI changes
Add fading on loading module using balloon hint instean of ordinary hint
- changed manifest of mobileEx.exe, SL3 Bruteforce (sl3bf.exe) from 'asInvoker' to 'requireAdministrator'.
Library and modules will need to update their xml configuration files regularly,
or create if xml configuration is not exists. This operation required admin level on vista and win7 core.
- to not confuse users, Nokia USB ROM is now displayed only when no physical NMWCD* device connected
for dead usb flashing, Nokia USB ROM should be used instead of 'Phonet' device
* NMWCD: Nokia Mobile Wireless Communication Devices
- improved auto enable RAPIDO "FUR Cold Boot" by usb hub information
- improved synchronize files routine, auto retry when download failed.
- improved GetFlashAddress and Custom Erase function
(not pooling phone after operation)
- improved *.default(config update) file handling
- removed experimental "run in main thread" bug caused app hang
- usb flashing routine improved
- usb connection handling improved